- Pin BB 0123456789
- WhatsApp 1234567890
- Line 2345678901
Detail Produk
Kategori
:
LAIN-LAIN
Features:
- It features digital isolation technology to minimise the impact of temperature and weather changes and thus ensure compatibility of equipment with the environment.
- The digital signal processing ensures the validity and reliability of the signal through the filtration of the alternating current, the myoelectric filtration and heart rate monitoring.
- It features an automatic adjustment of the baseline to minimise changes caused by interference and optimise printing position. Thus, it allows a high quality ECG.
- It offers automatic analysis and measurement of routine parameters to lighten the workload of professionals.
- The ECG waves are recorded with the thermal printing method, so the layout is clear and precise allowing a good diagnostic.
- The simultaneous use of 12-lead and 63 mm thermal paper allow obtention of an electrocardiogram rapidly, making out of this equipment an efficient, effective and affordable one.
- You can select a rhythm lead to facilitate observation of abnormal heart rhythm.
- Auto change AC / DC, built-in rechargeable battery, charging circuit of the battery and control and protection system for batteries.
- Classified as Class I and CF type according to the standard IEC 60601-1.
- Intuitive and friendly display.
Intended use:
- Applications: diagnosis of heart disease, chest pain analysis in patients with acute myocardial ischemia and myocardial infarction, diagnosis of patients with arrhythmias.
- This equipment can be used with: adults, children and newborns.
- It can be used in places like hospitals, clinics, ambulances.
System design:
Front view:
- Printer: To load paper and print the ECG waveform and other data.
- Button to open the paper compartment: Press this button to open the compartment and load or remove the paper.
- Cable connector: for cables connection.
- LCD : to display information on the patient’s electrocardiogram and determine the status of equipment.
- Buttons: to control the device.
Bottom and side panel:
- Integrated handle: to transport or move the device.
- Battery compartment: to put the rechargeable battery.
- USB port: To transmit ECG data to a PC and analyze the results. Thus, the ECG data can be stored in a computer for study or training activities.
- Input / Output connector: to import and draw external signals as the arterial pulse and heart sound, as well as to export to the ECG signal to oscilloscope or other devices.
- SD card port: to identify and read the SD card with a maximum capacity of 2 GB.
- Plug: To connect the power cord.
- Grounding terminal: to connect the equipotential bonding cable.
Technical data:
1. Main unit:
- Leads: 12 standard leads.
- Acquisition mode: acquisition with 12 simultaneous leads.
- Register format:
- Automatic 1 channel/ automatic 2 channels.
- Automatic 3 channels/rythm mode.
- Manual 1 channel/ Manual 2 channels/ Manual 3 channels.
- Register mode:
- Automatic: Automatic lead switch with measurement and analysis function.
- Manual: Automatic lead switch without measurement and analysis function.
- Long term register: Long term register (30-180 sec.) and rythm analysis.
- Measurement parameters: ventricular rate, PR interval, QRS time limit, QT/QTC interval, axis P/QRS/T, amplitude RV5/ SV1 and amplitude RV5+SV1
- Filters: AC, drift and myoelectrical filters.
- Inlet CIR current: ≤ 0.1μA
- Impedance inlet: > 50 MΩ
- Patient leak current < 10 μA
- Time constant: ≥ 3.2 s
- Response frequency: 0.05 Hz~150 Hz
- Noise level: <15 μVp-p
- Sensitivity threshold: ≤ 20μV
- Paper speed: 4 levels (6.25, 12.5, 25, 50) mm/s, tolerance ≤ 5 %
- Sensitivity: 4 levels (2.5, 5, 10, 20) mm/mV
- Calibration voltage: 1 mV ± 3 %
- Inlet circuit: Floating inlet circuit.
2. Printer:
- Printing mode:
- Matrix printing
- 8 dots/mm (perpendicular)
- 40 dots/mm (horizontal, 25 mm/s)
- Paper specifications:
- 63 mm x 30 m or 63 mm x 20 m, paper roll
- 63 mm x 75 mm x 20 m, continuous paper
- Paper speed: (6.25, 12.5, 25, 50) mm/s ± 5 %
3. Others:
- Leads: Cable with 12 leads defibrillation proof.
- LCD display: status, time, heart rythm, backlight.
- Safety classification: IEC60601-1 Class I, CF type
- AC supply: 100 V~240 V, 50/60 Hz, 50 VA
- DC supply: rechargeable lithium battery, 14.8 V/1550 mAh
- Fuse: T1.6 A/250 V (built-in).
- Lag fuse DC: Automatic fuse 3.1 A/250 V (built-in).
Dimensions and weight:
- Length x width x height: 268 x 206 x 67.5 mm.
- Weight: 3.3 kg approx.
Environmental requirements:
Transport:
- Environmental temperature: – 20 ºC ~ + 55 ºC
- Relative humidity: 25 % ~ 95 % (non-condensing)
- Air pressure: 50 Kpa ~ 106 KPa
- Avoid direct contact with sun and rain during transport.
Storage:
- Environmental temperature: -10ºC ~ +40ºC
- Relative humidity: 25 % ~ 80 %
- Air pressure: 50 Kpa ~ 106 KPa
- Store the device in a well ventilated room free of corrosive gases.
Use:
- Environmental temperature: +5 ºC ~ +40 ºC
- Relative humidity: 25 % ~ 95 %
- Air pressure: 70 Kpa ~ 106 KPa
Specifications for external input and external output:
External input (EXT):
- Input impedance: ≥ 100 kΩ
- Sensitivity: 10 mm/V ± 5 %
- Input voltage range: ± 2.5 V
- Earthed input
External output (CRO):
- Output impedance: ≤ 100 Ω
- Sensitivity: 1 V/mV ± 5 % (a 10 mm/mV)
- Earthed output
Includes:
- ECG device
- Thermal paper
- Grounding cable
- Mains cable
- 4 limb electrodes
- 6 chest electrodes
- Print roll
- Patient cable
- User’s manual
Optional accessory:
- Pack 2 paper rolls for ECG 63 mm x 20 m (Ref. 548-ROLL1103)
Certification:
- Directive CE 93/42 on Medical Devices.
Tidak ada produk berkaitan.
Tidak ada produk popular.