|
|
|
|
|
Capacity x Resolution (grams) |
102 x 0.0001 g |
Capacity x Resolution (milligrams) |
1020000 x 1 mg |
Capacity x Resolution (ounces) |
3.59 x 0.00001 oz |
Capacity x Resolution (troy ounces) |
3.27 x 0.00001 ozt |
Capacity x Resolution (carats) |
510 x 0.001 ct |
Capacity x Resolution (pennyweight) |
65.5 x 0.0001 dwt |
Capacity x Resolution (grains) |
1574 x 0.002 GN |
Counting Mode
Min. Unit Mass |
0.1 mg |
Counting Mode
# of Samples |
10, 25, 50 or 100 pieces |
Percent Mode
Min. 100% Ref. Mass |
10.0 mg |
Percent Mode
Min. 100% Display |
0.01%, 0.1%, 1%
(depends on the
reference mass stored) |
Repeatability (Std. Deviation) |
0.1 mg |
Linearity |
± 0.2 mg |
Stabilization Time
(typically set at FAST) |
Approximately 2 seconds |
Sensitivity Drift
(10°C to 30°C) |
± 2 ppm / °C |
Sensing Method |
Compact Super Hybrid Sensor (SHS) |
Motorized Internal Calibration |
NO – only the HR-AZ Series offers this feature |
Clock and calendar function |
NO – only the HR-AZ Series offers this feature. Date and time is required for GLP compliance. So if you are GLP then you must buy the HR-100AZ |
Breeze Break |
Large Breeze Break 7.9″ high (breeze break detaches in seconds making cleaning easier and enables top-loading operation.) |
Operating Temperature |
5°C to 40°C (41°F to 104°F), 85% RH or less (No condensation) |
Display Type |
Reverse back-lit display |
Display Refresh Rate |
5 times / second or 10 times / second |
Std. Serial Interface |
RS-232C Interface |
Weighing Pan (diameter) |
3.5″ / 90 mm |
External Calibration
(Not included) |
100 grams
50 grams |
AC Adaptor |
120V AC Adapter Included. This balance runs on AC Adapter only, will NOT run on standard off the shelf alkaline batteries. |
Power Consumption |
Approximately 11 VA
(supplied to the AC Adaptor) |
External Dimensions
WxDxH |
7.8″ x 11.6″ x 12.4″
198 mm x 294 mm x 315 mm |
Net Weight |
Approximately 9 lbs |