inkubator memert IN 110
inkubator memert IN 110

inkubator memert IN 110

5 (1 votes)

share

natural convection adjustment of pre-heated fresh air admixture by air flap control in 10 % steps vent connection with restrictor…
sold out
Rp

Ventilation and Control

  • natural convection
  • adjustment of pre-heated fresh air admixture by air flap control in 10 % steps
  • vent connection with restrictor flap
  • adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
  • self-diagnostics for fault analysis
  • 1 Pt100 sensor DIN class A in 4-wire-circuit
  • Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
  • parameters adjustable on ControlCOCKPIT: temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime
  • SetpointWAIT function – the process time does not start until the set temperature is reached
  • AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).
  • Setting of languages on ControlCOCKPIT: German/English/Spanish/French
  • resolution of display for setpoint and actual temperature values 0.1°C
  • calibration facility directly at ControlCOCKPIT for three freely selectable temperature values
  • programme stored in case of power failure
  • incl. works calibration certificate for +37°C

Overtemperature protection (double)

  • adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature

Textured Stainless Steel Casing

  • w x h x d: 745 x 864 x 584 mm
  • fully insulated stainless steel door with
    2-point locking (compression door lock)
  • inner glass door
  • rear zinc-plated steel

Interior - Heating Concept

  • w x h x d: 560 x 480 x 400 mm, 108 l
  • easy-to-clean interior,made of stainless steel,reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
  • 2 stainless steel grids
  • Max. loading of chamber: 175 kg

Temperature Range

  • min. 5°C above ambient up to +80°C

Voltage / Power Rating

  • 230 V (+/- 10 %), 50/60 Hz / approx. 1.400 W
  • 115 V (+/- 10 %), 50/60 Hz / approx. 1.100 W

Packing Data

  • net weight approx. 78 kg
  • gross weight carton approx. 103 kg
  • dimensions approx.:
    carton w x h x d: 83 x 105 x 80 cm
  • the appliances must be transported upright
Pemesanan via SMS

Produk Pernah Dilihat

Detail Produk

Kategori : LAIN-LAIN

Ventilation and Control

  • natural convection
  • adjustment of pre-heated fresh air admixture by air flap control in 10 % steps
  • vent connection with restrictor flap
  • adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
  • self-diagnostics for fault analysis
  • 1 Pt100 sensor DIN class A in 4-wire-circuit
  • Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
  • parameters adjustable on ControlCOCKPIT: temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime
  • SetpointWAIT function – the process time does not start until the set temperature is reached
  • AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).
  • Setting of languages on ControlCOCKPIT: German/English/Spanish/French
  • resolution of display for setpoint and actual temperature values 0.1°C
  • calibration facility directly at ControlCOCKPIT for three freely selectable temperature values
  • programme stored in case of power failure
  • incl. works calibration certificate for +37°C

Overtemperature protection (double)

  • adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature

Textured Stainless Steel Casing

  • w x h x d: 745 x 864 x 584 mm
  • fully insulated stainless steel door with
    2-point locking (compression door lock)
  • inner glass door
  • rear zinc-plated steel

Interior - Heating Concept

  • w x h x d: 560 x 480 x 400 mm, 108 l
  • easy-to-clean interior,made of stainless steel,reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
  • 2 stainless steel grids
  • Max. loading of chamber: 175 kg

Temperature Range

  • min. 5°C above ambient up to +80°C

Voltage / Power Rating

  • 230 V (+/- 10 %), 50/60 Hz / approx. 1.400 W
  • 115 V (+/- 10 %), 50/60 Hz / approx. 1.100 W

Packing Data

  • net weight approx. 78 kg
  • gross weight carton approx. 103 kg
  • dimensions approx.:
    carton w x h x d: 83 x 105 x 80 cm
  • the appliances must be transported upright

Tulis Komentar Anda

Semua kolom wajib diisi *

Tidak ada produk berkaitan.

Tidak ada produk popular.

lihat semua produk bestseller
lihat semua produk top rating