Inkubator Fisher Scientific™ Isotemp™ Standard Lab Incubators

Includes: Small (2.5 cu. ft.) and medium (3.75 cu. ft.) incubators each come with one plated-steel shelf; large (5.0 cu. ft.) incubator comes with two shelves.
Easy to operate

• Microprocessor control
• Controls are conveniently located at the top of the incubator chamber
• Keypad with arrow keys to increase or decrease set point temperature in 0.1°C increments
• Overtemperature value is automatically set at 3°C above setpoint
• PID controller comes with fixed parameters so no tuning is required
• Circuit breaker protects incubator from power surges; battery backup
• Designed to stack two units

Big three-character LED display

• Digits display actual temperature to nearest 0.1°C
• Display shows current value for set point temperature
• HEAT indicator light cycles on and off to show when incubator heaters are on
• ALARM indicator lights up if temperature exceeds overtemperature limit; backup controller maintains temperature at 3°C above setpoint; safety backup built into software

Small, medium and large workload capacities

• Available in three chamber capacities
• Mounting holes at 2 in. (5cm) intervals on the chamber walls for shelf placement
• Small incubator holds a maximum of five shelves, medium incubator holds eight, and large incubator holds eleven

Low-maintenance incubators with inner and outer doors

• Cabinet has durable, enamel-coated steel exterior
• Extruded aluminum trim has acrylic powder coating
• Chamber is easy-to-clean stainless steel
• Low-watt-density heater elements are designed for long life
• Silicone gasket on outer door and 3 in. thick (7.6cm) fiberglass insulation throughout prevent heat loss
• Outer door opens to 180° for unhindered access and features two grabber-type latches
• Inner door is tempered glass
• Steel shelves are 17.37 in. wide and 16.75 in. front-to-back (44 x 42.5cm)
• Black synthetic rubber feet keep incubator from slipping and maintain a space between incubator and benchtop for ventilation

• Microprocessor control
• Controls are conveniently located at the top of the incubator chamber
• Keypad with arrow keys to increase or decrease set point temperature in 0.1°C increments
• Overtemperature value is automatically set at 3°C above setpoint
• PID controller comes with fixed parameters so no tuning is required
• Circuit breaker protects incubator from power surges; battery backup
• Designed to stack two units

Big three-character LED display

• Digits display actual temperature to nearest 0.1°C
• Display shows current value for set point temperature
• HEAT indicator light cycles on and off to show when incubator heaters are on
• ALARM indicator lights up if temperature exceeds overtemperature limit; backup controller maintains temperature at 3°C above setpoint; safety backup built into software

Small, medium and large workload capacities

• Available in three chamber capacities
• Mounting holes at 2 in. (5cm) intervals on the chamber walls for shelf placement
• Small incubator holds a maximum of five shelves, medium incubator holds eight, and large incubator holds eleven

Low-maintenance incubators with inner and outer doors

• Cabinet has durable, enamel-coated steel exterior
• Extruded aluminum trim has acrylic powder coating
• Chamber is easy-to-clean stainless steel
• Low-watt-density heater elements are designed for long life
• Silicone gasket on outer door and 3 in. thick (7.6cm) fiberglass insulation throughout prevent heat loss
• Outer door opens to 180° for unhindered access and features two grabber-type latches
• Inner door is tempered glass
• Steel shelves are 17.37 in. wide and 16.75 in. front-to-back (44 x 42.5cm)
• Black synthetic rubber feet keep incubator from slipping and maintain a space between incubator and benchtop for ventilation

Certifications: CSA approved.
Warranty: One year
Service agreement available.