Memmert UNE 600

Ventilation and Control

• forced air circulation by quiet air turbine,

adjustable in 10% steps via process controller

• continuous adjustment of pre-heated fresh air

admixture

• vent connection with restrictor flap
• fuzzy-supported PID microprocessor

controller with integrated autodiagnostic

system with fault indication

• solid state switching unit
• 2 Pt100 sensors Class A in 4-wire-circuit,

mutually monitoring and taking over the

performance at the same temperature value

• digital 7-day-programme-timer with real time

clock, precise minute setting, for one set

value or ramp operation in combination with:

• integrated digital timer for tempering profile

with max. 4 segments, each segment

adjustable from 1 min to 999 hours:

DELAYED ON

HEATING UP

HOLD or HOLD set-temperature-dependent

with guaranteed holding time

COOLING DOWN

• “Loop” function to repeat profile 1-99 times or

endless

• digital display (LED) of all set parameters,

such as temperature, weekdays, time, fan

speed, ramp segments and set-up values

• resolution of display for set value 0,5 °C; for

actual value 0,1 °C below 99,9 °C, 0,5 °C

above 100 °C

• long-term logging (ring store) of all relevant

data, GLP-conforming as data logger – 1024

kB

• serial interface RS 232 including MEMMERT

Software „Celsius 2007″ for programming and

documentation

• incl. works calibration certificate for +160 °C

Triple Overtemperature Protection

• in case of overtemperature due to failure, the

heating is switched off at approx. 10 °C above

the set temperature (fixed value)

• independently working, digitally adjustable

electronic overtemperature controller TWW

protection class 3.1

• resolution of display and setting accuracy: 0,5

°C below 99,9 °C, 1 °C above 100 °C

• mechanical temperature limiter TB protection

class 1 switching the heating off at approx. 10

°C above max. oven temperature

Textured Stainless Steel Casing

• w x h x d: 950 x 920 x 650 mm
• fully insulated stainless steel doors with

double locking and 4-point adjustment

• rear zinc-plated steel

Interior – Heating Concept

• w x h x d: 800 x 640 x 500 mm, 256 l
• easy-to-clean interior, made of stainless steel,

reinforced by deep drawn ribbing with

integrated and protected large-area heating

on four sides

• 2 perforated stainless steel shelves, nontipping

Temperature Range

• from +30 °C (however, at least 10 °C above

ambient) up to +250 °C

Voltage / Power Rating

• 230 V (+/- 10%), 50/60 Hz
• ca. 2.400 W (during heating)
• adaption of effective heating power

depending on the set temperature

Packing Data

• net weight approx. 94 kg
• gross weight carton approx. 115 kg
• gross weight wooden case approx. 130 kg
• dimensions approx.:

carton w x h x d: 110 x 114 x 84 cm

wooden case w x h x d: 108 x 113 x 82 cm

• the appliances must be transported upright

Customs Tariff Number

• 8419 3990

Country of Origin

• Federal Republic of Germany

WEEE-Reg.-No.

• DE 66812464

Accessories

• Temperature range +300 °C for

universal ovens (not available for

ovens with glass door)

A0

• Perforated stainless steel shelf, nontipping

E0(x)

• IQ check list with works test data for

oven as support for validation by

customer

Q1

• OQ check list including one freeselectable

temperature distribution

survey to DIN 12880 for 9 measuring

points with works test data for oven

as support for validation by customer Q2

Brosur 237 Memmert UNE 600